Autor Thema: English manual  (Gelesen 5703 mal)

Offline Olivier

  • Senior-Mitglied
  • Beiträge: 64
English manual
« am: 13. Januar 2019, 21:35:00 »
Hello Everybody,

When the English manual of Windigipet 2018 might be available?

Many thanks for your answer.

Best regards.

Olivier
  • Win-Digipet-Version:
    2021
  • Anlagenkonfiguration:
    Märklin CS3 plus / Märklin Link S88 / KPF Zeller
  • Rechnerkonfiguration:
    Window 10 Home and Pro Edition

Offline Per Olsen

  • Senior-Mitglied
  • Beiträge: 571
  • Ort: Bergen, Norway Ort bei GoogleMaps suchen no
Re: English manual
« Antwort #1 am: 23. Januar 2019, 08:03:41 »
Hello!

I struggle a bit with the german manual myself, but I have managed so far :) Did you get any respons as to when the English version of the manual will be here?

Regards,
Per
  • Win-Digipet-Version:
    WinDigiPet 2021
  • Anlagenkonfiguration:
    Tams Master Control.  Maerklin C-tracks. 6xBolls boosters.   2xLittfinski HSI-88 USB.  Bolls RMDs.   Viessmann and Bolls switch-decoders.
  • Rechnerkonfiguration:
    Windows 11 2,7GHz CPU, 16Gb RAM.

Offline Olivier

  • Senior-Mitglied
  • Beiträge: 64
Re: English manual
« Antwort #2 am: 30. Januar 2019, 21:40:12 »
Hello Per,

So far no answer from anybody regarding the English manual, I know it takes time and usually English manuals is released 6 to 9 months after German version. I would like at least Windigipet team to give us rough idea of the timing.

Many thanks for your answer.

Best regards.

Olivier
  • Win-Digipet-Version:
    2021
  • Anlagenkonfiguration:
    Märklin CS3 plus / Märklin Link S88 / KPF Zeller
  • Rechnerkonfiguration:
    Window 10 Home and Pro Edition

Offline Peterlin

  • Administrator
  • Senior-Mitglied
  • Beiträge: 4493
  • Ort: Hürth bei Köln Ort bei GoogleMaps suchen
    • www.windigipet.de
Re: English manual
« Antwort #3 am: 02. Februar 2019, 16:56:01 »
Hello,

sorry for the delay.

In fact, this time we have a big problem with the translation of the english manual.
My staff member Markus Herzog, who has made the last english translation, had no time to make it for the version 2018. He has too much work with programming. The new translator has stopped his work due time problems.
1000 pages is a real lot of work.
So, we dont know when the manual 2018 will be finished. Le'ts hope that it will be finished any time.
Schöne Grüße aus Hürth
Peter Peterlin

Offline Olivier

  • Senior-Mitglied
  • Beiträge: 64
Re: English manual
« Antwort #4 am: 05. Februar 2019, 19:23:36 »
Dear Dr. Peterlin,

Thank you for your answer, I hope we will get a translation in a not too far future. Out of the 1000 pages I hope some chapters from previous English manual might be partially used.

It would be especially useful to get translated chapter 11(Fahrdienstleiter) and 12 (Der Stellwerkswärter) which are the most important new features of the 2018 version. Other new feature like Multipläne can be understood if you are already familiar with Windigipet.

If you could upload at least these two chapters translation, that would be greatly appreciated.

Thank you for your support.

With my best regards.

Olivier
  • Win-Digipet-Version:
    2021
  • Anlagenkonfiguration:
    Märklin CS3 plus / Märklin Link S88 / KPF Zeller
  • Rechnerkonfiguration:
    Window 10 Home and Pro Edition

Offline beano

  • Junior-Mitglied
  • Beiträge: 17
Re: English manual
« Antwort #5 am: 23. März 2019, 20:09:07 »
I hope the translator for 2018!is better than the one who did 2009. I find that manual very difficult to understand.😩

Offline Markus Herzog

  • Administrator
  • Senior-Mitglied
  • Beiträge: 16403
  • Ort: Rheinland Ort bei GoogleMaps suchen de
Re: English manual
« Antwort #6 am: 23. März 2019, 21:43:44 »
Thank you for the compliment  >:(
  • Win-Digipet-Version:
    WDP 2021.x Beta
  • Anlagenkonfiguration:
    3-Leiter Anlage, Rollendes Material Märklin/Roco/Brawa/Mehano, Fahren: DCC, m3 via Tams MC, Schalten/Melden: Selectrix, BiDiB, Motorola (nur wenige Sonderaufgaben)
  • Rechnerkonfiguration:
    Intel i7

Offline Per Olsen

  • Senior-Mitglied
  • Beiträge: 571
  • Ort: Bergen, Norway Ort bei GoogleMaps suchen no
Re: English manual
« Antwort #7 am: 23. März 2019, 23:55:13 »
Hi Markus.

I disagree with beano!  I thank you for all your fantastic work with WDP.

Best regards,
Per.
  • Win-Digipet-Version:
    WinDigiPet 2021
  • Anlagenkonfiguration:
    Tams Master Control.  Maerklin C-tracks. 6xBolls boosters.   2xLittfinski HSI-88 USB.  Bolls RMDs.   Viessmann and Bolls switch-decoders.
  • Rechnerkonfiguration:
    Windows 11 2,7GHz CPU, 16Gb RAM.

Offline Adrian L

  • Senior-Mitglied
  • Beiträge: 165
  • Ort: Australia Ort bei GoogleMaps suchen au
Re: English manual
« Antwort #8 am: 24. März 2019, 06:59:09 »
Hello Markus,

YES!   I agree with Per's message, and I also thank you for your great work on WDP..

Best regards from Australia,
Adrian
« Letzte Änderung: 24. März 2019, 07:03:02 von Adrian L »
Adrian
WDP 2018.2d on Intel i5 (8Gb RAM) running Windows 10 Professional (64-bit) with ESU ECoS 50200 version 4.2.7, ESU Mobile Control II and LDT HSI-88 USB running Marklin M-track based layout - and loving it!
  • Win-Digipet-Version:
    2018.2d
  • Anlagenkonfiguration:
    Marklin H0
  • Rechnerkonfiguration:
    Windows 10 Pro (64-bit) Intel i5 (8Gb RAM) SSD

Offline Maxi

  • Junior-Mitglied
  • Beiträge: 20
  • Ort: Canada Ort bei GoogleMaps suchen ca
Re: English manual
« Antwort #9 am: 28. März 2019, 01:12:13 »
Hope the delay in the translation is not a lengthy one, but I am sure it will be worth the wait.

From experience, I know all too well how translating documents from one language to another is a very time consuming task.

Keep up the good work.
  • Win-Digipet-Version:
    2018.2d Premium Edition
    2021.1.13 Premium Edition
  • Anlagenkonfiguration:
    • Track: Gauge H0, Märklin C-Track
    • Digital Systems: Märklin 6021/6051, Booster Homemade
    • Switch: S83/84 Decoder Homemade
    • Report: S88
  • Rechnerkonfiguration:
    8GB Ram, Windows 8.1
    PC Software:
    Symbolgroup-Editor 2018
    Symbolgroup-Editor 2021
    Collection 2019 with service pack 3
    Wintrack 16.0.1

Offline Student1

  • Junior-Mitglied
  • Beiträge: 6
  • au
Re: English manual holdup
« Antwort #10 am: 26. April 2019, 04:29:34 »
Dear Markus & Peter:

We have been loyal supporters of WDP over the years and have purchased different versions as they have been made available which also includes the 2018 version. Each time we have read the documentation the explanation of this complex and excellent software has been good and the english grammar has been highly scored at 98/99% correct. Please accept out thanks and congratulation!

Unfortunately in that last 1% or 2% sometimes most of the meaning is lost.  This slows us down until we work it out logically and iteratively etc. Not really a problem as my father and I always admit that we are lucky the German authors do speak 100% correct english and write 98%/99% grammatically correct. Of course Germans have been taught English at school since young childhood. On the other hand we have only been taught the German language from grade 8 for three years with only two 40 minute lessons per week......nothing much to speak of!!!.....so we are disadvantaged slightly.

I have worked in my entire academic and professional career for many years with Germans here is Australia so I understand their culture of "we must not publish work that we are not satisfied to a perfect result".  In the very long meantime we have purchased a vast complex WDP 2018 software program with a handbook in German that cannot be read and perhaps at best only guessed what the meanings are = we are suffering!!!

Please use the Microsoft Word file you have in German text and run it through an online translator to convert it to English. Then run the MsWord English grammar and spell checker on the resultant file and we will achieve a WDP 2018 Handbook of 90% or more accurate......and then please send it to us! I am sure we would all be happy and can fix up the last 10% of the manual that did not make itself clear in our English Language :) 

The PDF you supply in German text cannot be easily converted to MsWord as the formatting is lost especially around the images. Therefore at least supply the German Handbook in MsWord so we can convert it as I have outlined above?

Kind regards
John Neilson (retired senior lecturer QUT)
B.Pharm (Qld), Dip H.Inf.Ther (USA), MBA (Qld), PhD candidate in Nanotechnology & Aerospace Engineering(Qld) 

  • Win-Digipet-Version:
    12.1
  • Anlagenkonfiguration:
    HO fleischmann
  • Rechnerkonfiguration:
    Windows 7

Offline Markus Herzog

  • Administrator
  • Senior-Mitglied
  • Beiträge: 16403
  • Ort: Rheinland Ort bei GoogleMaps suchen de
Re: English manual
« Antwort #11 am: 27. April 2019, 12:56:27 »
Hello John,

We had already tried the online translator way. The result was extremly annonying. So we stopped this way.

For the last versions I did the translations. But programming Win-Digipet needs more and more time every year (and I cannot stop my family life and normal job just because of WDP). Thus I had to decide, that I am not able to translate the manual this time.
But after some time we found someone who is now translating the manual. He is a retired scientist and thus he has more time than me and can even speak english very well. He is making good progress and we discuss translation results several times a week.

So: the translation is still work in progress but we see light at the end of the tunnel.

Regards
Markus
  • Win-Digipet-Version:
    WDP 2021.x Beta
  • Anlagenkonfiguration:
    3-Leiter Anlage, Rollendes Material Märklin/Roco/Brawa/Mehano, Fahren: DCC, m3 via Tams MC, Schalten/Melden: Selectrix, BiDiB, Motorola (nur wenige Sonderaufgaben)
  • Rechnerkonfiguration:
    Intel i7

Offline Maxi

  • Junior-Mitglied
  • Beiträge: 20
  • Ort: Canada Ort bei GoogleMaps suchen ca
Re: English manual
« Antwort #12 am: 01. Mai 2019, 02:17:40 »
Light at the end of the tunnel is welcoming news.

Thank you Markus for the update.

Regards
Matthew
  • Win-Digipet-Version:
    2018.2d Premium Edition
    2021.1.13 Premium Edition
  • Anlagenkonfiguration:
    • Track: Gauge H0, Märklin C-Track
    • Digital Systems: Märklin 6021/6051, Booster Homemade
    • Switch: S83/84 Decoder Homemade
    • Report: S88
  • Rechnerkonfiguration:
    8GB Ram, Windows 8.1
    PC Software:
    Symbolgroup-Editor 2018
    Symbolgroup-Editor 2021
    Collection 2019 with service pack 3
    Wintrack 16.0.1

Offline hvilsted

  • Junior-Mitglied
  • Beiträge: 17
  • dk
Re: English manual
« Antwort #13 am: 05. August 2019, 14:15:50 »
Markus, repect to your father for the translation.

Jan
Win-Digipet Version:
  2021.1b Premium English
Layout Configuration:
   Märklin H0 C-Tracks, CS2  Wired ethernet, S88 Link, Q-Decoder
PC Configuration:
  Windows 10

Offline Per Olsen

  • Senior-Mitglied
  • Beiträge: 571
  • Ort: Bergen, Norway Ort bei GoogleMaps suchen no
Re: English manual
« Antwort #14 am: 08. August 2019, 20:28:49 »
Hello Markus!

Thank you a lot, big thanks to Your father!  Fantastic job!

Best regards,
Per.
  • Win-Digipet-Version:
    WinDigiPet 2021
  • Anlagenkonfiguration:
    Tams Master Control.  Maerklin C-tracks. 6xBolls boosters.   2xLittfinski HSI-88 USB.  Bolls RMDs.   Viessmann and Bolls switch-decoders.
  • Rechnerkonfiguration:
    Windows 11 2,7GHz CPU, 16Gb RAM.