Autor Thema: S88 with ESU Ecos troubleshooting  (Gelesen 1818 mal)

Offline beano

  • Junior-Mitglied
  • Beiträge: 17
S88 with ESU Ecos troubleshooting
« am: 23. März 2019, 19:37:28 »
Hello fellow Windigipetters
I am setting up feedback from my turnouts using Viesmann S88 decoders. I have done the following
1) connected decoder to S88 link to Ecos.
2) configured S88 bus on Ecos and tested. Little black squares move works great on Ecos
3) configured feedback modules 1-2 on feedback contact setup screen WDP
4) restart WDP
5) cannot see status of contacts on Feedback monitor. All squares are grey.

What am I doing wrong or have not done?

Offline Markus Herzog

  • Administrator
  • Senior-Mitglied
  • Beiträge: 16403
  • Ort: Rheinland Ort bei GoogleMaps suchen de
Re: S88 with ESU Ecos troubleshooting
« Antwort #1 am: 23. März 2019, 21:49:29 »
Hello,

In the normal feedback monitor you can only see feedback contacts which have been assigned to track symbols. Unassigned feedback contacts are always gray in that monitor.

You need to use the feedback monitor for all contacts. This monitor is independent from track symbol assignments.

Regards
M. Herzog
  • Win-Digipet-Version:
    WDP 2021.x Beta
  • Anlagenkonfiguration:
    3-Leiter Anlage, Rollendes Material Märklin/Roco/Brawa/Mehano, Fahren: DCC, m3 via Tams MC, Schalten/Melden: Selectrix, BiDiB, Motorola (nur wenige Sonderaufgaben)
  • Rechnerkonfiguration:
    Intel i7