Autor Thema: Programming the Marklin 60760 decoder  (Gelesen 2460 mal)

Offline Andy Foster

  • Junior-Mitglied
  • Beiträge: 22
  • gb
Programming the Marklin 60760 decoder
« am: 03. Mai 2023, 23:01:31 »
Dear All

I am currently in the process of calibrating (with the measuring track) several Marklin locomotives with the 60760 decoder installed in them.
My questions are ...
1) can I enter the CV's for max speed, braking delay etc with the decoder programmer in WDP 2021 premium with the locomotive on the programming track of my ecos50200. If yes what Marklin Motorola decoder template should I select to program the CV's. Or is it a case of using my old Marklin 6021 digital control box to program the CV's manually.
2) Do you know how many speed steps the 60760 decoder has?.

Many thanks

Andy 
  • Win-Digipet-Version:
    WDP 2021 Premium Edition
  • Anlagenkonfiguration:
    Marklin Digital / ECOS 50200 & Intellibox
  • Rechnerkonfiguration:
    Dell, Intell i5, 8gb ram, Windows 10

Offline Thomas Hirsch

  • Senior-Mitglied
  • Beiträge: 1454
  • Ort: NRW-Krefeld Ort bei GoogleMaps suchen
Re: Programming the Marklin 60760 decoder
« Antwort #1 am: 04. Mai 2023, 00:10:46 »
Hello Andy,

it is possible to change Address , V-min , V-max, acceleration and deceleration!

But because of the Motorola Protokoll you only can write, reading is not possible!

The 60760 Decoder has only 14 Speed steps!

the easiest way to change this decoder is using the mobile station 2 !
Mit freundlichen Grüßen

  Thomas Hirsch

________________________

System :Märklin Motorola + Mfx / Centrale Fahren: Tams Mastercontrol  über RS 232 / Booster 6017 /  /CC-Schnitte für MFX Programmierung und  Magnetartikel / HSI mit 28 S88/  Intel DUAL Core 2x2500 Mhz , 2048 MB Ram  XP-prof SP III / Gleis: Märklin M- , und K-Gleis / Decoder : 6090x und MFX ,Mld,Msd &  Lopi4 / Uhlenbrock freie Zone / WD Premium Ed 2018
  • Win-Digipet-Version:
    WD 2021.b
  • Anlagenkonfiguration:
    Tams Mastercontrol  über RS 232 / Booster 6017 /  CC-Schnitte zur mfx prgrammierung und Magnetartikel / HSI mit 23 S88
  • Rechnerkonfiguration:
    PC - Intel DUAL Core 2x2500 Mhz / XP-prof.