Autor Thema: Allocation of Boosters.  (Gelesen 1897 mal)

Offline Rupert van Swol

  • Senior-Mitglied
  • Beiträge: 311
  • Ort: Enkhuizen Ort bei GoogleMaps suchen nl
  • Model trains? it's a life time journey
Allocation of Boosters.
« am: 19. April 2021, 14:10:33 »
Hello Forum members,

I have three BidiB booster on my model railway.
Two boosters are for powering the Rails. ( two separate circuits )
The third booster is only for powering and controlling the turnouts, signals and other switchable controls. I notice that when starting WDP the third booster is not activated.
The turnouts ( rails only  ) are assigned to a booster but the third Booster ( power supply DCC ) for the turnout is not.
Is this because the third booster is not assigned?

kind regards,

Rupert
  • Win-Digipet-Version:
    Win-Digipet-Version: 2021.1.13
  • Anlagenkonfiguration:
    2-Leiter, Lodi Rektor; 3x Lodi Booster; Lodi LX  S882.+ 8x Lodi GBM8v2, Lodi S88 CM + 2x Lodi RM16+; Lodi Shift +8x DW-DC+4x 16-SD-DFL, Lodi Con
  • Rechnerkonfiguration:
    IntelNUC8i7HVK /32GB Ram /Radeon™ RX Vega M GH /Windows 11 Profi edition

Offline Markus Herzog

  • Administrator
  • Senior-Mitglied
  • Beiträge: 16403
  • Ort: Rheinland Ort bei GoogleMaps suchen de
Re: Allocation of Boosters.
« Antwort #1 am: 19. April 2021, 18:26:10 »
Hello Eric,

Is the third booster maybe not registered in the Booster management and is maybe for this booster not set the option in the booster management to to start it on track signal power on?

Regards
Markus
  • Win-Digipet-Version:
    WDP 2021.x Beta
  • Anlagenkonfiguration:
    3-Leiter Anlage, Rollendes Material Märklin/Roco/Brawa/Mehano, Fahren: DCC, m3 via Tams MC, Schalten/Melden: Selectrix, BiDiB, Motorola (nur wenige Sonderaufgaben)
  • Rechnerkonfiguration:
    Intel i7

Offline Rupert van Swol

  • Senior-Mitglied
  • Beiträge: 311
  • Ort: Enkhuizen Ort bei GoogleMaps suchen nl
  • Model trains? it's a life time journey
Re: Allocation of Boosters.
« Antwort #2 am: 19. April 2021, 20:08:05 »
Hello Markus,
and indeed the Booster was assigned, but the check mark on booster parameters " start booster after program start " was missing.
Also this again solved.

greetings

Rupert 
  • Win-Digipet-Version:
    Win-Digipet-Version: 2021.1.13
  • Anlagenkonfiguration:
    2-Leiter, Lodi Rektor; 3x Lodi Booster; Lodi LX  S882.+ 8x Lodi GBM8v2, Lodi S88 CM + 2x Lodi RM16+; Lodi Shift +8x DW-DC+4x 16-SD-DFL, Lodi Con
  • Rechnerkonfiguration:
    IntelNUC8i7HVK /32GB Ram /Radeon™ RX Vega M GH /Windows 11 Profi edition