Hi there. Another help needed.
I'm using a CS2 with WDP 2009 demo. My layout is all red, and I don't have any feedback module connected. If I remove in the system configuration, the feedback modules it turns the red color of, but when I define one module it turns all red. Can be a problem with the CS2? How can I be sure?
Thanks.
Zitat von: Gleisundzug in 27. März 2011, 12:29:50
Hi there. Another help needed.
I'm using a CS2 with WDP 2009 demo. My layout is all red, and I don't have any feedback module connected. If I remove in the system configuration, the feedback modules it turns the red color of, but when I define one module it turns all red. Can be a problem with the CS2? How can I be sure?
Thanks.
When I turn the FX monitor, all feedbak number are red, as occupaid. but no wire to the S88.
Hi,
have you tried to connect an single (empty) S88 module to the S88 port of the CS2, maybe the S88 ports needs a load and has a problem with an unconnected port.
Regards
Markus
Zitat von: Markus Herzog in 27. März 2011, 17:52:14
Hi,
have you tried to connect an single (empty) S88 module to the S88 port of the CS2, maybe the S88 ports needs a load and has a problem with an unconnected port.
Regards
Markus
Hi,
Yes I did try with and without S88 module, and even any track connected. Same result. The info on WDP is all track's occupied. It seems the thae CS2 as a short circuit on the control module and send's back occupied informacion to the computer.
Thanks.
Hi,
try to turn the s88 plug 180°. Maybe it's plug in the wrong way. I don't know if this hint fits to the CS2 for I have a Tams MC.
Hello,
I had a similar problem when I first installed an s88 to my CS2. I originally connected the ground wire to the s88. I then tried it with the ground wire disconnected. It worked with the ground wire disconnected.
Hope this helps,
Elliott
Zitat von: Hwnel in 28. März 2011, 09:53:29
Hello,
I had a similar problem when I first installed an s88 to my CS2. I originally connected the ground wire to the s88. I then tried it with the ground wire disconnected. It worked with the ground wire disconnected.
Hope this helps,
Elliott
Hi,
I don't have the ground wire connected. The information that the CS2 is sending to WDP, is that all tracks are occupied, even without any S88 or cable connected.
I think the port of the S88 in the CS2 is in short circuit.
Many thanks,
NR