Hello,
I try to configure my YD7001 station via LAN.
Everythings works, I mean loks & accessories.
The only trouble, is that I don't see the occupancy status (color) on track view !?
DR5088RCC - WDP - 1.pngDR5088RCC - WDP - 2.pngDR5088RCC - WDP - 3.png
Many thanks
Hi,
You have to assign the feedback contact numbers in the second row of the module configuration.
Got to the edit Mode and right klick in an empty field. within the submenu you'll find what you need.
Sorry, but I do not understand.
Where is "second row of the module configuration" ?
Hi again,
please refer to your picture with the feedback modules. the first maodule have 32 contaccts. Some of them are occupied indicated by red colour in the port-number field (for example port 17) these port numbers i mentioned are in the first row.
below these port numbers within the same module you see 32 empty fields (the 2nd row). Here you have to assign your feedback numbers in the way i described in my first post.
regards
Bernd
+++
btw.: in this forum we use our first names for salutation. It's more personal. ;)
Hi Bernd,
Thanks for your feedback ( ;D )
I understood that I have to fill the FB-N° below existing numbers.
But in Edit mode, if I right-click, nothing happens. I don't understand how to open these "." :-X
How access this ?
DR5088RCC - WDP - 4.png
Thanks for your patience.
Hi,
that sounds a little bit weird. See the screenshot below. The picture shows the feeback configuration dialogue in edit mode with the sub-menu (opened by klick with the right mouse-button in one of th empty fields. Off course this screenshot i've got in the office-version without connection to any layout, but this doesn't matter.
Maybe you can send a backup of your project and put it in here. so we have a chance to see what's going wrong.
regards
Bernd
Thanks Bernd,
Your support is highly appreciated.
Here is the backup ;
WDP_BACKUP_WDP2021_2026_03_10_14_21_0001.zip
Hello again,
i'm sorry but you don't send a backup of your data. the file you attached is a backup of the 2021 demo project. please try again with your own project data. 8)
one question; which version of Win-Digipet you are using (2021/2025 premium or small)?
Demo version.
Hi,
i checked it once again. the asigning of feedback numbers works also with the demo version (2025). It is also possible to save your project and put it in here.
the files down below are out of the 2025 demo version screenshots and a small feedback configuration.
regards Bernd
Hello,
Here it is ;
WDP_DATENSICHERUNG_Chenois_2026_03_19_09_00.ZIP
Hello Bernd,
Did you see something in my layout :-\ ?
Hi,
I've put together a configuration for you to show you what it should look like.
When you open the feedback configuration in the track layout, you can see the feedback modules you've already entered by clicking on them.
One more thing: please add a greeting with your first name at the end, since it's customary here in the forum to address each other by first name.
I hope this helps you out.
Hello,
i'm sorry but i've been on a business trip the last week. Before i leaved i checked your layout with the demo version and everything works fine. i can set the feedback numbers to the module(s).
One note: It's not necessary to configure one digitalsystem twice. For the Yamorc i recommend to connect the station via network and operate it in TCP Binary mode. This has to configure in Win-Digipet and also via the Yamorc-Tool in the station.
Please take a look to the attachments. One is a copy of your project and the picture shows the configuration of one feeback module with som fb numbers out of your track layout.
regards from Berlin
Bernd
No problem 8)
If I set 1 digital system, LBServer, this what I have ;
Request feedback module status 2.png
And the initialization takes a very long time ;
Request feedback module status 2.png
And with your file :
I have access for first detector ;
Chenois 2 - 1.png
But not the second !??
Chenois 2 - 2.png
Hello Bernd,
Is there anything I can do, I would really try WDP :'(
Hello,
the inputs of the second detector are reported to the program but not assigned to any module (text also states "unassigned").
In the edit mode click with the mouse button on menu button of the Loconet box and select the menu line for creating a new module. No assign the input number 17 to 32 to a new module and press OK.
Now you can assign feedback contact numbers.
This intermediate step is necessary because in the loconet protocol there is no way to detect feedback modules "as block". The program only see a bunch of report input numbers.
Regards
Markus