More Emergency stop

[kiv@vftronic.no]

By pressing the emergency stop button on CS3+, and then reactivate it on CS3+ after some minutes (5), the error message below occurs (com_error.jpg).
When this issue occur the communication to CS is broken and train will then not restart. By closing the error message the icon for Marklin Central station is grayed out, see arrow in image below, by clicking this icon a menu appear, by clicking button <Init system> the communication to CS3+ is established and the train will start again. How to to avoid this problem?

[Markus Herzog]

Hi,

This message occurs from a loco direction command. It means MFX loco with SID 10 direction forward. Win-Digipet tries to repeat the command three times and if then no answer has arrived, we assume that the connection to your system is lost.

May be some energy saving settings on your PC or something else. Nothing we can solve from our side.

Regards
Markus

[kiv@vftronic.no]

Thanks for your answer
There are no issues when emergency is activated from your software, only by pressing emergency switch on CS3 this issue occurs.
My conclusion then:
When activate emergency stop by CS3, this unit also switch of power to its own communications port/unit and by that your software loses contact after some time. Solution is to split power in two parts, one fór communications and one for the trainpower itself.
I will receive a Ecos unit shortly and will then do equal test and let you know.